ZyXEL Communications Prestige P-870HW-51a v2 - Manual (Page 144)

Chapter 13 Remote Management
P-870HW-51a v2 User’s Guide
144
Click Advanced > Remote MGMT to open the following screen. Use this screen
to configure your P-870HA to be managed by an ACS.
Figure 69 TR-069
The following table describes the fields in this screen.
Table 44 TR-069
LABEL DESCRIPTION
Inform Select Enable to activate remote management via TR-069 on the
WAN. Otherwise, select Disable.
Inform Interval Enter the time interval (in seconds) at which the ZyXEL Device sends
information to the auto-configuration server.
ACS URL Enter the URL or IP address of the auto-configuration server.
ACS User Name Enter the TR-069 user name for authentication with the auto-
configuration server.
ACS Password Enter the TR-069 password for authentication with the auto-
configuration server.
WAN Interface
used by TR-069
client Select a WAN interface through which the TR-069 traffic passes.
Connection
Request
Authentication Select this option to enable authentication when there is a connection
request from the ACS.
Connection
Request User
Name Enter the connection request user name.
When the ACS makes a connection request to the ZyXEL Device, this
user name is used to authenticate the ACS.