ZyXEL Communications Prestige P-870HW-51a v2 - Manual (Page 132)

Chapter 11 Quality of Service (QoS)
P-870HW-51a v2 User’s Guide
132
11.4.1 Adding a QoS Queue
Click the Add button or the edit icon in the Queue Setup screen to configure a
queue.
Figure 65 QoS Queue Setup: Add
The following table describes the labels in this screen.
Modify Click the edit icon to go to the screen where you can edit the queue.
Click the remove icon to delete an existing queue. Note that subsequent
rules move up by one when you take this action.
Apply Click Apply to save your changes back to the ZyXEL Device.
Table 38 QoS Queue Setup
LABEL DESCRIPTION
Table 39 QoS Queue Setup: Add
LABEL DESCRIPTION
Active Select to enable or disable this rule.
Queue Name Enter the descriptive name of this rule.
Queue
Interface Select the interface to which this rule is applied.
Queue
Precedence Select the priority queue of this rule.
The smaller the number, the higher the priority level.
Back Click Back to return to the previous screen without saving.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to begin configuring this screen afresh.