ZyXEL Communications Prestige P-870HW-51a v2 - Manual (Page 178)

Chapter 17 Tools
P-870HW-51a v2 User’s Guide
178
If the upload was not successful, the following screen will appear. Click Tools >
Configuration to go back to the Configuration screen.
Figure 99 Configuration Upload Error
Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and
return the ZyXEL Device to its factory defaults. The following warning screen
appears.
Figure 100 Reset Warning Message
You can also press the RESET button on the rear panel to reset the factory
defaults of your ZyXEL Device. Refer to
Section 1.6 on page 22 for more
information on the RESET button.
17.4 The Restart Screen
System restart allows you to reboot the ZyXEL Device without turning the power
off.