ZyXEL Communications Prestige P-870HW-51a v2 - Manual (Page 166)

Chapter 15 System Settings
P-870HW-51a v2 User’s Guide
166
15.2 The General Screen
Use the General screen to configure system settings such as the system
password.
Click Maintenance > System to open the General screen.
Figure 88 Maintenance > System > General
The following table describes the labels in this screen.
Table 49 Maintenance > System > Genera
LABEL DESCRIPTION
UserName This shows the user name you use to access the system.
Old Password Type the default password or the existing password you use to access the
system in this field.
New Password Type your new system password (up to 30 characters). Note that as you
type a password, the screen displays a (*) for each character you type.
After you change the password, use the new password to access the
ZyXEL Device.
Retype to
Confirm Type the new password again for confirmation.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to begin configuring this screen afresh.