ZyXEL Communications Prestige P-870HW-51a v2 - Manual (Page 146)

Chapter 13 Remote Management
P-870HW-51a v2 User’s Guide
146
The following table describes the fields in this screen.
13.4 The IP Address Screen
Click Advanced > Remote MGMT > IP Address to open the following screen.
Use this screen to specify the “trusted” computers from which an administrator
may use a service to manage the ZyXEL Device.
Figure 71 IP Address
The following table describes the fields in this screen.
Table 45 Access Control: Services
LABEL DESCRIPTION
Service Control
Mode Select Enable to turn on service control. Otherwise, select Disable.
Services This is the service you may use to access the ZyXEL Device.
LAN Select the Enable check box for the corresponding services that you
want to allow access to the ZyXEL Device from the LAN.
WAN Select the Enable check box for the corresponding services that you
want to allow access to the ZyXEL Device from the WAN.
Save/Apply Click this button to save your changes back to the ZyXEL Device.
Table 46 IP Address
LABEL DESCRIPTION
Access Control
Mode Select Enable to activate the secured client list. Select Disable to
disable the list without deleting it.
IP Address This is the IP address of the trusted computer from which you can
manage the ZyXEL Device.