ZyXEL Communications Prestige P-870HW-51a v2 - Manual (Page 142)

Chapter 12 Dynamic DNS Setup
P-870HW-51a v2 User’s Guide
142
12.3 The Dynamic DNS Screen
To change your ZyXEL Device’s DDNS, click Advanced > Dynamic DNS. The
screen appears as shown.
Figure 68 Advanced > Dynamic DNS
The following table describes the fields in this screen.
Table 43 Advanced > Dynamic DNS
LABEL DESCRIPTION
Service
Provider Select the name of your Dynamic DNS service provider.
Host Name Type the domain name assigned to your ZyXEL Device by your Dynamic
DNS provider.
You can specify up to two host names in the field separated by a comma
(",").
Interface Select the WAN interface to use for updating the IP address of the
domain name.
User Name Type your user name.
Password Type the password assigned to you.
Email If you select TZO in the Service Provider field, enter the user name
you used to register for this service.
Key If you select TZO in the Service Provider field, enter the password you
used to register for this service.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to begin configuring this screen afresh.