ZyXEL Communications Prestige P-870HW-51a v2 - Manual (Page 170)

Chapter 16 Logs
P-870HW-51a v2 User’s Guide
170
The log wraps around and deletes the old entries after it fills.
Figure 90 Maintenance > Logs > View Log
The following table describes the fields in this screen.
16.3 The Log Settings Screen
Use the Log Settings screen to configure to where the ZyXEL Device is to send
logs and which logs and/or immediate alerts the ZyXEL Device is to record and
display.
Table 51 Maintenance > Logs > View Log
LABEL DESCRIPTION
Display Select a category of logs to view. The ZyXEL Device displays the logs with
the severity level equal to or higher than what you selected.
The order of the log severity (from the highest to the lowest) is
Emergency > Alert > Critical > Error > Warning > Notice > Informational
> Debugging.
Refresh Click this button to renew the log screen.
# This field is a sequential value and is not associated with a specific entry.
Date/Time This field displays the time the log was recorded.
Facility This field displays the system module from which the logs come.
Severity This field displays the severity type of the log.
Message This field states the reason for the log.