ZyXEL Communications Prestige P-870HW-51a v2 - Manual (Page 92)

Chapter 7 Wireless LAN
P-870HW-51a v2 User’s Guide
92
address. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the
MAC addresses of the devices to configure this screen.
Use this screen to change your ZyXEL Device’s MAC filter settings.Click Network
> Wireless LAN > MAC Filter. The following screen displays.
Figure 46 Wireless LAN > MAC Filter
The following table describes the labels in this screen.
Table 24 Wireless LAN > MAC Filter
LABEL DESCRIPTION
Active MAC
Filter Select the check box to enable MAC address filtering.
MAC Restrict
Mode
Define the filter action for the list of MAC addresses in the table below.
Select Allow to permit access to the ZyXEL Device, MAC addresses not
listed will be denied access to the ZyXEL Device.
Select Deny to block access to the ZyXEL Device, MAC addresses not listed
will be allowed to access the ZyXEL Device
MAC
Address Enter the MAC addresses of the wireless devices that are allowed or denied
access to the ZyXEL Device in these address fields. Enter the MAC
addresses in a valid MAC address format, that is, six hexadecimal character
pairs, for example, 12:34:56:78:9a:bc.
Add Entries Click this to save and insert the entry to the table below.
Set
This is the index number of the MAC address.
MAC
Address This is the MAC addresses of the wireless devices that are allowed or denied
access to the ZyXEL Device.
Remove Select the entry(ies) that you want to delete in the Remove column, then
click the Remove button.
Apply Click this to save your changes back to the ZyXEL Device.
Remove Click this to delete the selected entry(ies).