ZyXEL Communications V300 - Manual (Page 142)

Chapter 15 Tools
V300 User’s Guide
142
The following table describes the labels in this screen.
"
Do not turn off the V300 while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait two minutes before logging into
the V300 again.
Figure 138 Upload Warning
The V300 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 139 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Firmware screen.
Table 60 Maintenance > Tools > Firmware Upload
LABEL DESCRIPTION
Firmware
Upgrade
Uninstall Click this to remove the current firmware from the V300. You must do this before
uploading new firmware to the V300.
File Upload Type in the location of the file you want to upload in this field or click Browse... to find
it.
Browse... Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upload Click Upload to begin the upload process. This process may take up to two minutes.