ZyXEL Communications ZYWALL10 User Manual

Page 64

ZyWALL 10 Internet Security Gateway

4-2

Remote Node Setup

Table 4-1 Fields in Menu 11.1

FIELD

DESCRIPTION

EXAMPLE

Rem Node Name

Enter a descriptive name for the remote node. This field can
be up to eight characters.

LAoffice

Active

Press [SPACE BAR] to select Yes (activate remote node) or
No (deactivate remote node).

Yes

Encapsulation

Ethernet is the default encapsulation. Press the [SPACE
BAR] if you wish to change to PPPoE encapsulation.

Ethernet

Service Type

Press [SPACE BAR] to select from Standard, RR-Toshiba
(RoadRunner Toshiba authentication method) or RR-
Manager (RoadRunner Manager authentication method).
Choose one of the RoadRunner methods if your ISP is Time
Warner's RoadRunner; otherwise choose Standard.

Standard

Service Name

This is valid only when you have chosen PPPoE
encapsulation. If you are using PPPoE encapsulation, then
type the name of your PPPoE service here.

poellc

Outgoing

My Login

This field is applicable for PPPoE encapsulation only. Enter
the login name assigned by your ISP when the ZyWALL
calls this remote node. Some ISPs append this field to the
Service Name field above (e.g., jim@poellc) to access the
PPPoE server.

jim

My Password

Enter the password assigned by your ISP when the ZyWALL
calls this remote node. Valid for PPPoE encapsulation only.

*****

Server IP

This field is valid for RoadRunner service type only. The
ZyWALL will find the RoadRunner Server IP automatically if
this field is left blank. If it does not, then you must enter the
authentication server IP address here.

Route

This field refers to the protocol that will be routed by your
ZyWALL – IP is the only option for the ZyWALL 10.

Edit IP

This field leads to a “hidden” menu. Press [SPACE BAR] to
select Yes and press [ENTER] to go to Menu 11.3 -
Remote Node Network Layer Options.

Yes

Session Options

Edit Filter sets

This field leads to another “hidden” menu. Use the [SPACE
BAR] to select Yes and press [ENTER] to open menu 11.5
to edit the filter sets. See the Remote Node Filter section for
more details.

Yes