ZyXEL Communications ZYWALL10 - Manual (Page 135)

ZyWALL 10 Internet Security Gateway
10-4 Firmware and Configuration File Maintenance
10.3 Restore Configuration
Menu 24.6 -- System Maintenance - Restore Configuration allows you to restore the configuration via
the console port.
FTP and TFTP are the preferred methods for restoring your current workstation configuration to your
ZyWALL since FTP and TFTP are faster. Please note that the system reboots automatically after the file
transfer is complete.
Figure 10-5 System Maintenance — Restore Configuration
10.3.1 Example: Restore Configuration Using HyperTerminal
In menu 24.6 press y to continue.
Run the HyperTerminal program. Click Transfer, then Send File to display the following screen.
Figure 10-6 Example: Restore Configuration
Ready to restore Configuration via Xmodem.
Do you want to continue (y/n):
Type the rom
configuration file’s
location, or use Browse
to search for it.
Choose the Xmodem
protocol.
Then click Send.