ZyXEL Communications ZYWALL10 - Manual (Page 46)

ZyWALL 10 Internet Security Gateway
2-12 Hardware Installation & Initial Setup
Table 2-5 Configure Dynamic DNS Menu Fields
FIELD DESCRIPTION EXAMPLE
Service
Provider Enter the name of your Dynamic DNS client. www.dyndns.org
Active Press [SPACE BAR] to cycle between Yes or No. Yes
Host Enter the domain name assigned to your ZyWALL by your
Dynamic DNS provider. me.dyndns.org
EMAIL Enter your e-mail address. mail@mailserver
User Enter your user name.
Password Enter the password assigned to you.
Enable
Wildcard Your ZyWALL supports DYNDNS Wildcard. Press [SPACE
BAR] to cycle between Yes or No This field is N/A when you
choose DDNS client as your service provider. Yes
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…”
to save your configuration, or press [ESC] at any time to cancel.
The IP address will be updated when you reconfigure Menu 1 or perform DHCP client renewal.
If you have a private WAN IP address, then you cannot use Dynamic DNS.
2.8 WAN Setup
This section describes how to configure the WAN using Menu 2 — WAN Setup. From the main menu,
enter 2 to open menu 2.
ZyXEL recommends you configure this menu even if your ISP does not require MAC
address authentication.