ZyXEL Communications ZYWALL10 - Manual (Page 124)

ZyWALL 10 Internet Security Gateway
System Information & Diagnosis 9-5
9.2.2 Console Port Speed
You can change the speed of the console port through Menu 24.2.2 – Console Port Speed. Your ZyWALL
supports 9600 (default), 19200, 38400, 57600, and 115200 bps for the console port. Use the [SPACE BAR]
to select the desired speed in menu 24.2.2, as shown below.
Figure 9-5 Menu 24.2.2 — System Maintenance — Change Console Port Speed
9.3 Log and Trace
There are two logging facilities in the ZyWALL. The first is the error logs and trace records that are stored
locally. The second is the UNIX syslog facility for message logging.
9.3.1 Viewing Error Log
The first place you should look for clues when something goes wrong is the error/trace log. Follow the
procedure below to view the local error/trace log:
Step 1.
Select option 24 from the main menu to open Menu 24 - System Maintenance.
Step 2. From menu 24, select option 3 to open Menu 24.3 - System Maintenance - Log and Trace.
Step 3. Select the first option from Menu 24.3 - System Maintenance - Log and Trace to display the
error log in the system.
After the ZyWALL finishes displaying, you will have the option to clear the error log.
Menu 24.2.2 – System Maintenance – Change Console Port Speed
Console Port Speed: 115200
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.