ZyXEL Communications ZYWALL10 - Manual (Page 41)

ZyWALL 10 Internet Security Gateway
Hardware Installation & Initial Setup 2-7
2.5.2 System Management Terminal Interface Summary
Table 2-3 Main Menu Summary
NO. MENU TITLE FUNCTION
1 General Setup Use this menu to set up routing/bridging and general information.
2 WAN Setup Use this menu to clone a MAC address from a computer on your LAN.
3 Ethernet Setup Use this menu to configure LAN DHCP and TCP/IP settings as well as
apply LAN filters.
4 Internet Access Setup Configure your Internet Access setup (Internet address, gateway, login,
etc.) with this menu.
11 Remote Node Setup Use this menu to configure detailed remote node settings (your ISP is
also a remote node) as well as apply WAN filters.
12 Static Routing Setup Configure static routes for bridging and IP in this menu.
15 NAT Setup Use this menu to configure Network Address Translation.
21 Filter and Firewall Setup Configure filters, activate/deactivate the firewall and view the firewall log.
22 SNMP Configuration Use this menu to configure SNMP-related parameters.
23 System Password Change your password in this menu (recommended).
24 System Maintenance From displaying system status to uploading firmware, this menu provides
comprehensive system maintenance.
26 Schedule Setup Use this menu to schedule outgoing calls.
99 Exit Use this menu to exit (necessary for remote configuration).