ZyXEL Communications ZYWALL10 - Manual (Page 248)

ZyWALL 10 Internet Security Gateway
J CLI Commands
Function CLI Syntax Description
config edit firewall set
rule
srcaddr-subnet address>
Selects and edits a source address and subnet mask of
traffic which comply to this rule.
config edit firewall set
rule
srcaddr-range address> Selects and edits a source address range of traffic which
comply to this rule.
config edit firewall set
rule
destaddr-single address> Selects and edits a destination address of the traffic which
comply to this rule.
config edit firewall set
rule
destaddr-subnet address>
Selects and edits a destination address and subnet mask of
traffic which comply to this rule.
config edit firewall set
rule
destaddr-range address> Selects and edits a destination address range of traffic which
comply to this rule.
config edit firewall set
rule
TCP destport-single
Selects and edits the destination port of the traffic which
comply with this rule. For non-consecutive port numbers, the
user may repeat this command line to enter in the multiple
port numbers.
config edit firewall set
rule TCP destport-range
Selects and edits a destination port range of traffic which
comply to this rule.
config edit firewall set
rule
UDP destport-single
Selects and edits the destination port of the traffic which
comply with this rule. For non-consecutive port numbers, the
user may repeat this command line to enter in the multiple
port numbers.
config edit firewall set
rule UDP destport-range
Selects and edits a destination port range of traffic which
comply to this rule.
config edit firewall set
rule destport-custom
Types in the desired custom port name.