Xerox 4512N - Manual (Page 75)

P r i n t e r P a r a m e t e r s a n d D e f a u l t S e t t i n g s
C h a p t e r 3 : T h e C o n t r o l P a n e l ❖ 3-25
Parity †
Serial Menu
None, Even, Odd
† Appears only when the
serial interface option is
installed.
Sets the parity communications parameter.
Printer and host values must match.
Prt Screen
Misc Menu
OFF, 850, 852
Controls the default symbol set to allow 80 characters per line on A4 paper.
A4 paper is usually 77 characters wide. When set to 850 or 852, A4 width will
be able to accommodate 80 characters per line, and the default symbol set value
will correspond to PC-850 or PC-852. This item is useful when printing the 80
characters per line width of computer displays.
Resolution
Job Menu
600, 300
Sets the print resolution in dpi (dots per inch).
Robust XON †
Serial Menu
On, Off
†
Appears only when the
serial interface option is
installed.
Controls the XON datastream handshaking protocol. When set to On, the printer sends
signals at one-second intervals to tell the host it is ready to receive data.
St Saving †
Job Menu
Off, On
†
Used only when the
PostScript option is
installed.
Controls whether or not the printer saves data in memory when switching between PCL
5e and Postscript emulation. When set to Off, the user area is cleared at emulation
change.
Setting this item to On may require more memory.
Warn Msg
Config Menu
On, Off
Controls the display of memory-related warning messages. When set to On, Data Loss
Error and Data Memory Full messages will not be displayed.
Table 3.6 Control Panel menu items, settings, and descriptions (continued)
Menu Item,
Location,
Setting(s)
Description
Table 3.6 Page 3 of 3