Xerox 4512N - Manual (Page 183)

E n v i r o n m e n t a l S p e c i f i c a t i o n s
A p p e n d i x F : E n v i r o n m e n t a l S p e c i f i c a t i o n s ❖ F-5
Operational Safety Your Xerox equipment and supplies were designed and tested to meet
strict safety requirements. These include safety agency examination,
approval, and compliance with established environmental standards.
Attention to the following notes ensures the continued safe operation of
your equipment.
Always connect the equipment to a properly grounded power source
receptacle. If in doubt, have the receptacle checked by a qualified
electrician.
WARNING: Improper connection of the equipment grounding
conductor can result in electrical shock.
Always follow all warnings and instructions marked on, or supplied
with, the equipment.
Always locate the equipment on a solid support surface with adequate
strength for the weight of the machine.
Always exercise care in moving or relocating the equipment.
Always place the equipment in an area which provides adequate room
area for ventilation and servicing.
Always use the materials and supplies specifically designed for your
Xerox equipment. Use of unsuitable materials may result in poor
performance and, possibly, a hazardous situation.
Never use a ground adaptor plug to connect the equipment to a power
source receptacle that lacks a ground connection terminal.
Never attempt any maintenance function that is not specifically
described in this documentation.
Never obstruct ventilation openings. These are provided to prevent
overheating.
Never install the equipment near a radiator or any other heat source.
Never override or “cheat” electrical or mechanical interlock devices.
Never push objects of any kind into the ventilation openings.
Never operate the equipment if you notice unusual noises or odors.
Disconnect the power cord from the power source receptacle and
contact your dealer or Xerox / Rank Xerox to correct the problem.