Xerox 4512N - Manual (Page 64)

U s i n g t h e C o n t r o l P a n e l
3-14 ❖ D o c u P r i n t 4 5 1 2 / 4 5 1 2 N U s e r G u i d e
Change the parity
setting.
Controls a
communications
parameter for the
optional serial
interface.
Choices:
None, Even, Odd
On Line Takes the printer off-line. Printing Menu
Menu Displays the Job Menu. Job Menu
Menu Displays the Config Menu. Config Menu
Menu Displays the Serial Menu (if present). Serial Menu
Item Displays the Baud Rate item. Baud Rate=X *
Item Displays the Data Bit item. Data Bit=X *
Item Displays the Parity item. Parity=X *
Up or
Down
Changes the parity setting. Parity=N
Enter Saves the new value. Parity=N *
On Line Returns the printer on-line. PCL 5e A4/A4
Change the
Robust XON
setting.
Controls a datastream
handshaking protocol
for the optional serial
interface.
Choices:
On, Off
On Line Takes the printer off-line. Printing Menu
Menu Displays the Job Menu. Job Menu
Menu Displays the Config Menu. Config Menu
Menu Displays the Serial Menu (if present). Serial Menu
Item Displays the Baud Rate item. Baud Rate=X *
Item Displays the Data Bit item. Data Bit=X *
Item Displays the Parity item. Parity=X *
Item Displays the Robust XON item. Robust XON=X *
Up or
Down
Changes the Robust XON setting. Robust XON=N
Enter Saves the new value. Robust XON=N *
On Line Returns the printer on-line. PCL 5e A4/A4
Table 3.4 Using the Control Panel to set printer operation (continued)
Task
Key Press
Sequence
†
Action/Response Display Shows
Table 3.4 Page 7 of 9