ZyXEL Communications P-2602H - Manual (Page 78)

Chapter 5 Bandwidth Management Wizard
P-2602H(W)(L)-DxA User’s Guide
78
Figure 39 Wizard: Welcome
3 Select Active to allocate bandwidth to packets based on the packet size.
Figure 40 Bandwidth Management Wizard: General Information
The following fields describe the label in this screen.
4 Follow the on-screen instructions and click Finish to complete the wizard setup and save
your configuration.
Table 16 Bandwidth Management Wizard: General Information
LABEL DESCRIPTION
Active Select the Active check box to have the ZyXEL Device apply bandwidth
management to traffic going out through the ZyXEL Device’s WAN, LAN or WLAN
port based on the packet size.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Exit Click Exit to close the wizard screen without saving.