ZyXEL Communications P-2602H - Manual (Page 207)

P-2602H(W)(L)-DxA User’s Guide
207
C
H A P T E R
15
Firewall Configuration
This chapter shows you how to enable and configure the ZyXEL Device firewall.
15.1 Access Methods
The web configurator is, by far, the most comprehensive firewall configuration tool your
ZyXEL Device has to offer. For this reason, it is recommended that you configure your
firewall using the web configurator. CLI commands provide limited configuration options and
are only recommended for advanced users.
15.2 General Firewall Policy Overview
Firewall rules are grouped based on the direction of travel of packets to which they apply:
"
The LAN includes both the LAN port and the WLAN.
By default, the ZyXEL Device’s stateful packet inspection allows packets traveling in the
following directions:
• LAN to LAN/ Router
This allows computers on the LAN to manage the ZyXEL Device and communicate
between networks or subnets connected to the LAN interface.
• LAN to WAN
By default, the ZyXEL Device’s stateful packet inspection drops packets traveling in the
following directions:
• WAN to LAN
• WAN to WAN/ Router
This prevents computers on the WAN from using the ZyXEL Device as a gateway to
communicate with other computers on the WAN and/or managing the ZyXEL Device.
• LAN to LAN/ Router • WAN to LAN
• LAN to WAN • WAN to WAN/ Router