ZyXEL Communications P-2602H - Manual (Page 100)

Chapter 7 WAN Setup
P-2602H(W)(L)-DxA User’s Guide
100
7.5.1 Advanced Internet Access Setup
Use this screen to edit your ZyXEL Device's advanced WAN settings. Click the Advanced
Setup button in the Internet Access Setup screen. The screen appears as shown.
Figure 49 Advanced Internet Access Setup
The following table describes the labels in this screen.
Max Idle Timeout Specify an idle time-out in the Max Idle Timeout field when you select Connect
on Demand. The default setting is 0, which means the Internet session will not
timeout.
Apply Click Apply to save the changes.
Cancel Click Cancel to begin configuring this screen afresh.
Advanced Setup Click this button to display the Advanced WAN Setup screen and edit more
details of your WAN setup.
Table 22 Internet Access Setup (continued)
LABEL DESCRIPTION
Table 23 Advanced Internet Access Setup
LABEL DESCRIPTION
RIP & Multicast
Setup
RIP Direction RIP (Routing Information Protocol) allows a router to exchange routing information
with other routers. Use this field to control how much routing information the ZyXEL
Device sends and receives on the subnet.
Select the RIP direction from None, Both, In Only and Out Only.
RIP Version
Select the RIP version from RIP-1, RIP-2B and RIP-2M.