Phone usage, 1 dialing a telephone number, 2 using speed dial to dial a telephone number – ZyXEL Communications P-2602H User Manual
Page 191: 3 internal calls, 4 using call park and pickup, Chapter 13 phone usage, Phone usage (191)
P-2602H(W)(L)-DxA User’s Guide
191
C
H A P T E R
13
Phone Usage
This chapter describes how to use a phone connected to your ZyXEL Device for basic tasks.
"
Not all service providers support all features.
13.1 Dialing a Telephone Number
The PHONE LED turns green when your SIP account is registered. Dial a SIP number like
“12345” on your phone’s keypad.
Use speed dial entries (see
) for peer-to-peer calls or SIP numbers
that use letters. Dial the speed dial entry on your telephone’s keypad.
Use your VoIP service provider’s dialing plan to call regular telephone numbers.
13.2 Using Speed Dial to Dial a Telephone Number
After configuring the speed dial entry and adding it to the phonebook, press the speed dial
entry’s key combination on your phone’s keypad.
13.3 Internal Calls
Press “####” on your phone’s keypad to call the ZyXEL Device’s other phone port.
13.4 Using Call Park and Pickup
Do the following to put a call on hold on one phone and continue it on another (connected to
the ZyXEL Device). This feature may not be supported by all service providers.
1 During the call, press “*97#” and then any number (up to 8 digits long). You need to
remember this number in order to pick up the call on another phone. Hang up the
receiver.
2 Pick up another phone’s receiver. Press “#97#” followed by the same number you
entered before to continue the call.