ZyXEL Communications P-2602H - Manual (Page 51)

Chapter 2 Introducing the Web Configurator
P-2602H(W)(L)-DxA User’s Guide
51
2.2.2 Navigation Panel
Use the menu items on the navigation panel to open screens to configure ZyXEL Device
features. The following tables describe each menu item.
Table 4 Navigation Panel Summary
LINK TAB FUNCTION
Status This screen contains administrative and system-related information.
Network
WAN Internet Access
Setup
Use this screen to configure ISP parameters, WAN IP address assignment,
DNS servers and other advanced properties.
More
Connections
Use this screen to configure additional WAN connections.
WAN Backup
Setup
Use this screen to configure a backup gateway.
LAN IP Use this screen to configure LAN TCP/IP settings, enable Any IP and other
advanced properties.
DHCP Setup Use this screen to configure LAN DHCP settings.
Client List Use this screen to view current DHCP client information and to always
assign specific IP addresses to individual MAC addresses (and host
names).
IP Alias Use this screen to partition your LAN interface into subnets.
Wireless LAN
(“W” models
only)
General Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
OTIST Use this screen to assign your wireless security settings to wireless clients.
MAC Filter Use this screen to configure the ZyXEL Device to give exclusive access to
specific wireless clients or exclude specific wireless clients from accessing
the ZyXEL Device.
QoS WMM QoS allows you to prioritize wireless traffic according to the delivery
requirements of individual services.
NAT General Use this screen to enable NAT.
Port Forwarding Use this screen to make your local servers visible to the outside world.
Address
Mapping
Use this screen to configure network address translation mapping rules.
ALG Use this screen to enable or disable SIP ALG.
VoIP
SIP SIP Settings Use this screen to configure your ZyXEL Device’s Voice over IP settings.
QoS Use this screen to configure your ZyXEL Device’s Quality of Service
settings for VoIP.
Phone Analog Phone Use this screen to set which phone ports use which SIP accounts.
Common Use this screen to configure general phone port settings.
Region Use this screen to select your location and call service mode.