ZyXEL Communications P-2602H - Manual (Page 162)

Chapter 11 Voice
P-2602H(W)(L)-DxA User’s Guide
162
11.9 Advanced Analog Phone Setup Screen
Use this screen to edit advanced settings for each phone port. To access this screen, click
Advanced Setup in VoIP > Phone > Analog Phone.
Figure 94 Phone > Analog Phone > Advanced
PSTN Line (“L”
models only)
Select this if you want to receive phone calls from the PSTN line (that do not use
the Internet) on this phone port. If you select more than one source for incoming
calls, there is no way to distinguish between them when you receive phone calls.
Note: When the ZyXEL Device does not have power, regardless of
the settings you configure, only the phone connected to the
PHONE 1 port can be used for making calls. Ensure you
know which phone this is, so that in case of emergency you
can make outgoing calls.
Apply Click this to save your changes and to apply them to the ZyXEL Device.
Cancel Click this to set every field in this screen to its last-saved value.
Advanced Setup Click this to edit the advanced settings for this phone port. The Advanced Analog
Phone Setup screen appears.
Table 56 Phone > Analog Phone
LABEL DESCRIPTION