ZyXEL Communications P-2602H - Manual (Page 73)

Chapter 4 VoIP Wizard And Example
P-2602H(W)(L)-DxA User’s Guide
73
Figure 34 VoIP Wizard Configuration
The following table describes the labels in this screen.
Username VoIPUser This is the username you use to login to
your SIP account.
Password Password This is the password you use to login to
your SIP account.
Table 15 VoIP Wizard Configuration
LABEL DESCRIPTION
SIP Number Enter your SIP number in this field. Use the number or text that comes
before the @ symbol in a SIP account. If your SIP account is
[email protected] , your SIP number is “11223344”. You
can use up to 127 ASCII characters.
SIP Server Address Type the IP address or domain name of the SIP server in this field. It
doesn’t matter whether the SIP server is a proxy, redirect or register
server. You can use up to 95 ASCII characters.
SIP Service Domain Enter the SIP service domain name in this field (the domain name that
comes after the @ symbol in a SIP account like 11223344@SIPA-
Account.com ). You can use up to 127 ASCII Extended set characters.
User Name This is the name used to register this SIP account with the SIP register
server. Type the user name exactly as it was given to you. You can use up
to 95 ASCII characters.
Password Type the password associated with the user name above. You can use up
to 95 ASCII Extended set characters.
Check here to set up
SIP2 settings.
This screen configures SIP account 1. Select the check box if you have
a second SIP account that you want to use. You will need to configure
the same fields for the second SIP account.
Note: If you configure more than one SIP account, you need
to configure Analog Phone settings to distinguish
between the two accounts when you make and
receive phone calls.
Table 14 Sample SIP Account Information
INFORMATION
FROM VOIP SERVICE
PROVIDER
EXAMPLE VALUES DESCRIPTION