ZyXEL Communications P-2602H - Manual (Page 133)

Chapter 9 Wireless LAN
P-2602H(W)(L)-DxA User’s Guide
133
9.8 QoS Screen
The QoS screen allows you to automatically give a service (such as e-mail, VoIP or FTP) a
priority level.
Click Network > Wireless LAN > QoS. The following screen displays.
Figure 75 Wireless LAN: QoS
The following table describes the fields in this screen.
Table 41 Wireless LAN: QoS
LABEL DESCRIPTION
QoS Setup
Enable WMM QoS Select the check box to enable WMM QoS on the ZyXEL Device.
WMM QoS Policy Select Default to have the ZyXEL Device automatically give a service a
priority level according to the ToS value in the IP header of packets it sends.
WMM QoS (Wifi MultiMedia Quality of Service) gives high priority to voice and
video, which makes them run more smoothly.
Select Application Priority from the drop-down list box to display a table of
application names, services, ports and priorities to which you want to apply
WMM QoS.
The table appears only if you select Application Priority in WMM QoS
Policy.
# This is the number of an individual application entry.
Name This field displays a description given to an application entry.
Service This field displays either FTP, WWW, E-mail or a User Defined service to
which you want to apply WMM QoS.
Dest Port This field displays the destination port number to which the application sends
traffic.