ZyXEL Communications P-2602H - Manual (Page 240)

Chapter 18 VPN Screens
P-2602H(W)(L)-DxA User’s Guide
240
Figure 140 VPN Setup
The following table describes the fields in this screen.
Table 90 VPN Setup
LABEL DESCRIPTION
No. This is the VPN policy index number. Click a number to edit VPN policies.
Active This field displays whether the VPN policy is active or not. A Yes signifies that this
VPN policy is active. No signifies that this VPN policy is not active.
Name This field displays the identification name for this VPN policy.
Local Address This is the IP address(es) of computer(s) on your local network behind your ZyXEL
Device.
The same (static) IP address is displayed twice when the Local Address Type field
in the VPN-IKE (or VPN-Manual Key) screen is configured to Single.
The beginning and ending (static) IP addresses, in a range of computers are
displayed when the Local Address Type field in the VPN-IKE (or VPN-Manual
Key) screen is configured to Range.
A (static) IP address and a subnet mask are displayed when the Local Address
Type field in the VPN-IKE (or VPN-Manual Key) screen is configured to Subnet.