ZyXEL Communications P-2602H - Manual (Page 163)

Chapter 11 Voice
P-2602H(W)(L)-DxA User’s Guide
163
Each field is described in the following table.
11.10 Common Phone Settings Screen
Use this screen to activate and deactivate immediate dialing and set up call fallback. To access
this screen, click VoIP > Phone > Common.
Table 57 Phone > Analog Phone > Advanced
LABEL DESCRIPTION
Analog Phone Select Phone1 or Phone2 in this field to configure each analog phone port.
Voice Volume
Control
Speaking Volume Enter the loudness that the ZyXEL Device uses for speech that it sends to the
peer device.
-1 is the quietest, and 1 is the loudest.
Listening Volume Enter the loudness that the ZyXEL Device uses for speech that it receives from
the peer device. -1 is the quietest, and 1 is the loudest.
Echo Cancellation
G.168 Active Select this if you want to eliminate the echo caused by the sound of your voice
reverberating in the telephone receiver while you talk.
Dialing Interval
Select
Dialing Interval
Select
Enter the number of seconds the ZyXEL Device should wait after you stop dialing
numbers before it makes the phone call. The value depends on how quickly you
dial phone numbers.
If you select Active Immediate Dial in VoIP > Phone > Common, you can press
the pound key (#) to tell the ZyXEL Device to make the phone call immediately,
regardless of this setting.
Voice Active
Detector
Active VAD Select this if the ZyXEL Device should stop transmitting when you are not
speaking. This reduces the bandwidth the ZyXEL Device uses.
Auto Dial
Active Auto Dial Select this if you want the ZyXEL Device to automatically dial the phone number
you enter in the Auto Dial Phone Number field as soon as you take the phone off
the hook.
Auto Dial Phone
Number
If you select Active Auto Dial, enter the phone number you want the ZyXEL
Device to automatically dial in this field.
Back Click this to return to the Analog Phone screen without saving your changes.
Apply Click this to save your changes.
Cancel Click this to set every field in this screen to its last-saved value.