Xerox 8290 User Manual

Page 97

4 Printer Operation

8265/8290/8365/8390 User Guide

Notes

For more details about step adjustment, please refer to “Media Feed Compensation”

2) Cleaning

While printing, it could be possible that some nozzles drop out, in that case, perform a little, normal or
powerful cleaning.

Please follow the steps below to perform a cleaning.

When there are some missing nozzles, a cleaning should be done. Depending on the quantity of missing
nozzles and which head, a little, normal or powerful cleaning on head 1-2, head 3-4 or ALL could be done.

Step 1 :

Press the [F2] key of the operation panel.

To shift to the cleaning menu.

Step 2 :

Press the [F1] key or the [F2] key on the operation panel.

The product will perform following operations:

Setup items

Key name

Parameters

Description

ALL, Head 1 – Head 2

Clean ALL heads or head couple one or two

Cut & Feed

Little, normal, powerful

Set the intensity of a cleaning

Step 3 :

Press the [ENTER] key to start the requested cleaning.

3) Adjust heaters

While printing, the heater values can be changed. For example: when noticing cockling.

Please follow the steps below to adjust the heater temperatures.

Step 1 :

Press the [F3] key

Step 2 :

Following screen will be displayed

*Heaters* 1/2
A: S50-T

B: S40-T

C: S40-T

D: S50-T

Wait Heater Warming up