2 replacing the sponge in the spitting box – Xerox 8290 User Manual

Page 118

6 Maintenance

110

8265/8290/8365/8390 User Guide

6.2.3.2 Replacing the sponge in the spitting box.

Notes

•

Use gloves and tweezers to change the absorbent in the flushing box.

Step 1 :

Power ON the printer.

Step 2 :

Go to the H.Unlock Menu and press the F2 key to unlock the carriage.

Step 3 :

Open the Front Cover.

Step 4 :

Slide the carriage to the left to access the flushing sponge.

Step 5 :

Remove the old flushing sponge with tweezers. (See image below)

1 = Sponge
2 = Tweezers
3 = Gloves

Step 6 :

Install the new flushing sponge in the flushing box.

Notes

•

Make sure that the 2 holes are on the right side of the flushing box and that the pins of the black box
are in the holes of the absorbent.

1 = Two holes
2 = Pin of black box

Step 7 :

Close the Front Cover.

Step 8 :

Press the [ENTER] key to exit the H.Unlock Menu. The carriage will cap in and be locked.