Xerox 8290 - Manual (Page 57)

4 Printer Operation
8265/8290/8365/8390 User Guide 49
4.3.1.14 Drier (D) Menu
Set the temperature of the Drier.
Setup items Parameters Description
Drier OFF – 50°C Change drier temperature by operating the following keys.
• [F2] key: to increase the setup value.
• [F4] key: to decrease the setup value.
• [ENTER] key: to confirm the setup value
• [CANCEL] key: to cancel the setup value
Notes
• The default setting for the drier is set to ‘50°C’.
• The function of the drier (D): Heating the printed transfer paper evaporates the water fast enough so
that the print is touch-dry when wound.
4.3.1.15 HStatus Menu
Check the temperature of the heating elements.
Notes
A stands for the Heater.
B stands for the Fixer.
C stands for the Post Fixer.
D stands for the Dryer.
Press the [CANCEL] key to go to the previous menu.