Xerox 8290 - Manual (Page 133)

6 Maintenance
8265/8290/8365/8390 User Guide 125
1 Cutting blade holder lever
2 Cutting blade holder
Step 6 :
Take out the cutting blade (1).
Notes
Do not touch the edge of the cutting blade to avoid injury.
Do not drop the cutting blade or apply it on hard material. Doing so may damage or break the cutting blade.
Dispose the used cutting blade; put it in a plastic bag in accordance with local regulations or laws.
Step 7 :
Insert the new cutter into the media cutting blade holder.
Step 8 :
While slightly pressing the cutting blade holder tab, return the cutting blade lever to its original
position.
Step 9 :
Close the front cover.
Step 10 :
Press the [ENTER] key on the operation panel. The carriage returns to its original position.