2 cleaning around the bottom of heads – Xerox 8290 User Manual

Page 115

Text mode
Original mode

6 Maintenance

8265/8290/8365/8390 User Guide

107

6.2.1.2 Cleaning around the bottom of heads

Step 1 :

Open the left maintenance covers by removing the four screws.

Step 2 :

Power ON the printer.

Step 3 :

Go to the H.Unlock Menu and press the F2 key to unlock the carriage.

Step 4 :

Open the Front Cover.

Step 5 :

Slide the carriage into the left maintenance area.

Step 6 :

Clean the edges of the heads with a cleaning swab wetted by Eco-solvent Cleaning Liquid.
Make sure you do not touch, clean the nozzle plate; this would lead to poorer print quality.

Caution

•

Make sure not to touch the nozzle plate. This could lead to poorer print quality.

•

It is recommended to wear gloves (2) as shown on the picture below.

Cleaning Swabs

2 Gloves