Xerox 8290 - Manual (Page 85)

4 Printer Operation
8265/8290/8365/8390 User Guide 77
4.3.5.3 HeadWash Menu
To perform a head wash to remove all ink of the ink supplying system.
Setup items Parameters Description
No Do not wash the ink supplying system.
Yes To wash the ink supplying system.
HeadWash
- • [CANCEL] key: shift to the previous hierarchy
menu.
Notes
Only after two head wash cycles it is possible to change ink types. Use the ‘Ink Load‘ to load ink
The process consists of several cleaning loadings, several air loadings and one ink loading. On the
display of the operation panel a time indication is mentioned on the fourth line.
Message Time
1. Please remove cart.
2. Ink Discharge 7
3. Please insert Cleaning cart
4. During washing wait for a while 29
5. Remove cassettes
6. During washing wait for a while 7
7. The end
8. Ink Load 13
4.3.5.4 InkLoad Menu
Start and stop an ink load.
Setup items Parameters Description
Pump 1 Load ink into head 1 and 2
Pump 2 Load ink into head 3 and 4
ALL Load ink for complete system
InkLoad
- • [CANCEL] key: shift to the previous hierarchy
menu.