Xerox 8290 - Manual (Page 30)

3 Printer Setup
22 8265/8290/8365/8390 User Guide
3.3 CONNECTING THE NETWORK INTERFACE
The procedure for connecting the network interface is explained below. To connect the printer to the
network environment, follow the steps below.
Caution
•
Follow the instructions below when connecting the network interface cable. Otherwise,
electrical shock or fire may occur.
o
Do not touch the connector.
o
Do not connect the network cable connector to the interface board having different
specifications.
Step 1 : Turn off the printer.
Step 2 : Plug the connector of the Ethernet cable into the connector of the network interface board at
the back of the printer.
1 Network interface connector
2 Interface cable
Step 3 : Connect the other end of the Ethernet cable to the network.
Notes
Refer to "Network interface board operation manual" to use the network interface board.