4 when media jams occur, When media jams occur – Xerox 8290 User Manual

Page 111

5 Troubleshooting

8265/8290/8365/8390 User Guide

103

5.4 WHEN MEDIA JAMS OCCUR

If the loaded media gets jammed in the printer, follow the steps below to remove the media.

Step 1 :

Press [F4] to raise the pressure rollers.

Notes

For raising or lowering the pressure rollers, you can use the foot switch instead of the operation panel.

Step 2 :

If a piece of media or media dust is stocked in the printer, open the front cover and remove
the piece of media or media dust.

Caution

Be sure not to pinch your fingers while opening and closing media cover.

Front Cover

Step 3 :

If there is an error requiring a restart, power the printer OFF and ON again.

Step 4 :

Go to Media Handling in the User Guide to re-load the media.