Xerox 8290 - Manual (Page 55)

4 Printer Operation
8265/8290/8365/8390 User Guide 47
4.3.1.9 Stiffness Menu
Set the media sticking force (media stiffness) to the media guide.
Setup items Parameters Description
Soft Setting for soft media where media feeding errors
and media jams occur.
Normal Setting for normal media.
Stiffness
- After setting, shift to the previous hierarchy menu.
4.3.1.10 Thickness Menu
Set the media thickness.
Setup items Parameters Description
Thickness 50µm-<100µm>1500µm Change media thickness by operating the following keys.
• [F2] key: to increase the setup value.
• [F4] key: to decrease the setup value.
• [ENTER] key: to confirm the setup value
• [CANCEL] key: to cancel the setup value
Notes
Bidirectional quality can only be obtained when media thickness is set correctly
4.3.1.11 Heater (A) Menu
Set the temperature of the Heater.
Setup items Parameters Description
Heater (A) OFF – 50°C Change heater temperature by operating the following
keys.
• [F2] key: to increase the setup value.
• [F4] key: to decrease the setup value.
• [ENTER] key: to confirm the setup value
• [CANCEL] key: to cancel the setup value