Xerox 8290 - Manual (Page 69)

4 Printer Operation
8265/8290/8365/8390 User Guide 61
4.3.2.14 OnlineTimer Menu
Set time from the moment of receiving termination of printing data sent by computer to the recognition of
end of printing data.
Setup items Parameters Description
OnlineTimer OFF/2sec. - <30sec.> -
800sec. To change the Online time out time by operating
the following keys.
• [F2] key: to increase the setup value.
• [F4] key: to decrease the setup value.
• [ENTER] key: to confirm the setup value
• [CANCEL] key: to cancel the setup value
4.3.2.15 Layout Menu
Make various settings on layout function.
Notes
The layout function automatically determines the size of printing data sent from the computer, and then
determines the amount of roll media required without wasting media.
If sheet media has been loaded, the layout function is disabled.
Setup items Parameters Description
Joint Makes settings for stitching print.
CtPos To set the media cutting position after printing has been completed.
Layout
- [CANCEL] key: To shift to the previous hierarchy menu.
4.3.2.16 Joint Menu
Set joint printing.
Setup items Parameters Description
Does not perform stitching print.
On Performs stitching print
Joint
- - Shifts to the previous hierarchy menu.