Xerox 8290 - Manual (Page 36)

3 Printer Setup
28 8265/8290/8365/8390 User Guide
Notes
With a small intervention it is possible to reverse your winding direction. Mount the twist cable between the
control box and the front motorized unit cable.
Notes
You can use the roll-off foot switch during loading of roll media.
3.4.3 Setting Media Type
The procedure for setting media type is explained below.
Step 1 :
Turn the printer on and load the media.
¾ Once the media has been set, the media initial menu will be displayed.
Step 2 :
Press one of the following keys on the operation panel, and select the current media type.
¾ When alternating roll/sheet media selection: [F2]
¾ When changing from media loading: [F3]
¾ When changing media type: [F4]
Setup items Key Parameters Description
Roll media Media type F2
Sheet media
Alternates the roll media type.
• Roll media: Set when loading roll media.
• Sheet media: Set when loading sheet media.
Lever up Lever Down/Up F3
Lever down
Switches between up and down motion of the pressurizing
lever.
Use this when starting over from the media setup.
User 1
User 2
User 3
User 4
User 5
User 6
User 7 Media Type F4
User 8
Set media type for printing.
For setup values of printing operation, eight settings of "user
1-8" can be set.
Refer to ‘Menu Overview’