Xerox 8290 - Manual (Page 56)

4 Printer Operation
48 8265/8290/8365/8390 User Guide
Notes
• The default setting for the heater is set to ‘50°C’.
• The function of the heater (A): Warming the transfer paper before entering the pressure rollers. The
pre-expansion helps to minimize media cockling.
4.3.1.12 Fixer (B) Menu
Set the temperature of the Fixer.
Setup items Parameters Description
Fixer (B) OFF – 40°C Change fixer temperature by operating the following keys.
• [F2] key: to increase the setup value.
• [F4] key: to decrease the setup value.
• [ENTER] key: to confirm the setup value
• [CANCEL] key: to cancel the setup value
4.3.1.13 Post Fixer (C) Menu
Set the temperature of the Post Fixer.
Setup items Parameters Description
Post Fixer (C) OFF – 50°C Change post fixer temperature by operating the following keys.
• [F2] key: to increase the setup value.
• [F4] key: to decrease the setup value.
• [ENTER] key: to confirm the setup value
• [CANCEL] key: to cancel the setup value
*Post Fixer (C)*
OFF - 70 ºC +
50 ºC -
F2, F4 > ENTER