Xerox 8290 - Manual (Page 53)

4 Printer Operation
8265/8290/8365/8390 User Guide 45
4.3.1.6 User Menu
Make various settings on user defined media. In the User media menu, for each setup value of following
printing operation, eight settings of "user media 1-8" can be set.
Notes
When media other than the recommended media are used (user media), the following problems may occur:
• Media detection error
• Oblique, torn, and creased media
• Media jams
• Decrease in print quality due to blurring, missing, or smudging of ink
• End detection error of roll media
Problems caused by using media other than the recommended will void the warranty.
For more information, contact your local XEROX dealer.
Setup items Parameters Description
InkDryTime In order to let the ink for the printing dry, the time between the end
of the print and the beginning of the next print is set.
H.Height Sets the distance (head height) between the print head and the
media.
Stiffness Makes the setting on the stiffness of the media to be used.
User 1-8 (1/3)
Thickness Makes the setting on the thickness of the media to be used.
Heater Sets the temperature of the Heater.
Fixer Sets the temperature of the Fixer.
PostFixer Sets the temperature of the PostFixer.
User 1-8 (2/3)
Drier Sets the temperature of the Drier.
HStatus Checks the temperature of heating elements. User 1-8 (3/3)
Dist.Adj Performs various settings for media feed compensation.
User 1-8 (1/3-3/3) - [CANCEL] key: to shift to the previous hierarchy menu.
*User1*
Heater Fixer
PostFixer Drier
(2/3)