Xerox Phaser Color Printer 8400 - Manual (Page 63)

Envelopes
Phaser® 8400 Color Printer
2-32
Printing Envelopes in Tray 1
1. Insert envelopes into Tray 1 as follows:
■ Side-flap envelopes: Insert the envelopes with the flap side up and the flap of the
envelopes toward the left of the printer.
■ End-flap envelopes: If the end-flaps are extended, close but do not seal the flaps
before placing the envelopes in the tray. Insert the envelopes with the flap side up and
the end-flap of the envelope against the rollers.
2. Adjust the paper guides to fit against the envelopes.
3. At the printer’s front panel, press the OK button if the type of envelope is correct .
a. If the type of envelope is not correct, select Change , then press the OK button.
b. Select the envelope size, then press the OK button.
c. Select Plain Paper , then press the OK button to save your selection.
4. In the printer driver, select either the paper size or Tray 1 as the paper source.
For more information, go to Reference/Printing/Basic Printing on the User Documentation
CD-ROM.
8400-010 8400-091