Xerox Phaser Color Printer 8400 - Manual (Page 179)

Moving and Repacking the Printer
Phaser® 8400 Color Printer
4-38
4. Verify that the green flag in the exit tray is in the raised position. When the green flag is
raised the printhead is locked.
5. Wait for the printer to complete the cool-down period for the ink to solidify. The printer
will shutdown when it is cool enough to move.
Caution
If you turn off the printer but do not select Shut Down for Moving Printer , you
must wait 30 minutes before moving the printer. This allows a cool-down period for
the ink to solidify and ensures that the printer is safe to move.
6. Unplug the printer after the cool-down cycle is complete.
7. Lift the printer by using the hand holds on each side of the printer. Move the printer
separately from the 525-Sheet Feeder.
8400-099
28 kg
60 lbs.