Xerox Phaser Color Printer 8400 - Manual (Page 24)

Printer Settings
Phaser® 8400 Color Printer
1-17
Using the Printer’s Front Panel
To change the load paper timeout:
1. Select Printer Setup , then press the OK button.
2. Select Paper Handling Setup , then press the OK button.
3. Select Load Paper Timeout , then press the OK button.
4. Scroll to the desired timeout value. The values ( None , 1 , 3 , 5 , or 10 minutes, 1 hour or
24 hours) indicate the length of time you want the printer to wait for you to load paper
before printing. If you select a value of None , the printer does not wait for paper to be
inserted and immediately picks paper from the default tray.
5. Press the OK button to save the change.
Using CentreWare IS
To change the load paper timeout:
1. Launch your web browser.
2. Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3. Click Properties.
4. Click the General folder on the left sidebar, then click Printer Defaults.
5. Scroll to the desired Load Paper Timeout value in Timeout Settings. The values (None,
1, 3, 5, or 10 minutes, 1 or 24 hours) indicate the length of time you want the printer to
wait for you to load paper before printing. If you select a value of None, the printer does
not wait for paper to be inserted and immediately picks paper from the default tray.
6. Click Save Changes at the bottom of the screen.
Selecting Tray Settings
Selecting Trays
You can select trays by two different methods:
■ The printer’s front panel
■ CentreWare IS