Xerox Phaser Color Printer 8400 - Manual (Page 25)

Printer Settings
Phaser® 8400 Color Printer
1-18
Using the Front Panel
To specify tray selection:
1. At the printer’s front panel, select Printer Setup , then press the OK button.
2. Select Paper Handling Setup , then press the OK button.
3. Select Paper Source , then press the OK button.
4. Scroll to the desired tray or Auto Select .
5. Press the OK button to save the changes.
Note
The driver overrides the front panel settings and CentreWare IS for tray selection.
Using CentreWare IS
To select a tray:
1. Launch your web browser.
2. Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3. Click Properties.
4. Click General in the left sidebar.
5. Select Printer Defaults from the drop-down list.
6. Scroll to Print Mode Settings, then select the tray from the Paper Source drop-down list.
7. Click Save Changes at the bottom of the screen.
Adjusting Front Panel Brightness
To adjust the brightness of the front panel’s background lighting:
1. At the printer’s front panel, select Printer Setup , then press the OK button.
2. Select Front Panel Setup , then press the OK button.
3. Select Front Panel Brightness , then press the OK button.
4. Press the Down Arrow or Up Arrow button to increase or decrease the front panel
brightness value. The brightness values range from
0 (no background light) to 10
(brightest background light).
5. Press the OK button to save your change.