ZyXEL Communications omni.net Plus - Manual (Page 77)

Technical Reference for ZyXEL omni.net series
6-7
Last Number Redial
This functions allows you to redial the last number called on POTS port Phone 1 and 2, even after
the omni.net has been powered off and on again. The last numbers dialed on Phone 1 and 2 are
stored in Non-Volatile RAM (NVRAM) at locations [AT&Z38] and [AT&Z3]9 respectively.
To redial the last number
Press the Flash key, and * *
Quick Dial
With quick dial, you can instantly dial a number stored in the NVRAM memory of your omni.net.
Your omni.net can store up to 10 phone numbers (nn=00-09) available for quick dial.
1. To record a phone number for quick dial
Press the Flash key, and * nn * phone-number #
(Where nn=00-09, stored phone number index)
2. To clear a quick dial number
Press the Flash key and * nn * #
3. To dial a stored phone number quickly
Press the Flash key and * nn #
The omni.net stores the quick dial numbers in NVRAM at locations [AT&Z0]-[AT&Z9] on Phone
1 and [AT&Z10]-[AT&Z19] on Phone 2.
To display the list of quick dial phone numbers, issue the commands [ATQP1] (Phone 1), and
[ATQP2] (Phone 2), or [AT&Z?]