ZyXEL Communications omni.net Plus - Manual (Page 172)

Technical Reference for ZyXEL omni.net series
B-20
All the Following Commands Require a 'AT' Prefix
S Com. bit dec hex Function and description +Def./Ref.
7 Reserved.
S123= bit dec hex
0 0-3 0-3 Select Caller ID signaling method.
0 (*) 0 Country default.
1 1 DTMF, prior to ring.
2 2 ETS FSK, during ring.
3 3 ETSI FSK, prior to ring.
2-7 Reserved
S124= dec hex Empty IP packet interval for PPP +000
0-25
5 0-FF in units of 1s.
S125= bit dec hex
1-6 0 (*) Sub-persist time interval. KSxn
7 0 0 (*) S125b1-6 is in Second unit. KSSn
128 80 S125b1-6 is in Minute unit. KSMn
S126= bit dec hex
0-25
5 0-FF Add-threshold for BOD in Kbps unit JAn,+48
S127= bit dec hex
0-25
5 0-FF Sub-threshold for BOD in Kbps unit JSn,+32
Notes:
# In 'Reference' column, 'AT' is omitted when AT command is referred to.
# +nnn is manufacturer default when listed in 'Reference' column.
# bit = S-register bit number, 'b', used in 'ATSr.b=n', 'ATSr.b=?'
# dec = Decimal value, 'x', used in 'ATSn=x'
# hex = Hex value, used in omni.net LCD model for setting 'STATUS REGISTER' manually from front
panel.
Table 74. Extended S-Registers "ATSn=x"