Basic s-registers 'atsn=x – ZyXEL Communications omni.net Plus User Manual
Page 157
Technical Reference for ZyXEL omni.net series
B-5
Basic S-Registers 'ATSn=x'
All the Following Commands Require a 'AT' Prefix
S Com.
Function & Description
+Definition
S0=
Set the number of rings on which the omni.net will answer.
A '0' value disables auto-answer.
+000
S1=
Counts and stores number of rings from an incoming call.
+000
S2=
Define escape code character, default <+> (43 dec.).
+043
S3=
Define ASCII Carriage Return.
+013
S4=
Define ASCII Line Feed.
+010
S5=
Define ASCII Backspace.
+008
S7=
Set duration, in number of seconds, omni.net waits for a connection.
+060
S8=
Set duration, in seconds, for pause (,) option in Dial command and pause
between command re-executions for Repeat (>) command.
+002
Table 73. Basic S-Registers 'ATSn=x'