ZyXEL Communications omni.net Plus - Manual (Page 139)

Technical Reference for ZyXEL omni.net series
A-5
All the Following Commands Require a 'AT' Prefix
AT Com. Options Function & Description Reference
CF(transfer_no.) For USA NI-1 & DMS-100 switch, activate the call forwarding
variable function from the switch.
(Note: You should issue AT&ZF4=n first, where n=IOC of CFV)
CF For USA NI-I & DMS-100 switch, deactivate the call forwarding
variable.
CFxy(transfer_no.) For DSS1, active the call forwarding service.
CFxy For DSS1, deactivate the call forwarding service
x=B Call forwarding busy(CFB)
U Call forwarding unconditional(CFU)
NR Call forwarding no-reply(or no-response,CFNR)
y=S All services
I ISDN data(unrestricted digital)
A POTS 1, phone1
B POTS 2, phone2
CF? Query the status of call forwarding (DSS1 only.)
CG Diagnostics
CH? Display the accumulated charging unit of the last call.
CI Prefix number string to be added to the calling-party-number before
indicating to the DTE when the type of number denotes national.
CLn n=0-2048 Maximum size of user data in a packet (number of octets).
CL? Inquire the current setting of ATCLn
CN Prefix number string to be added to the Calling-Party-Number before
indicating to the DTE when the type of number denotes national.
CPn Loopback 4 control. S83b0
CP0 Disable Loopback 4.
CP1 Enable Loopback 4.
CRn n=0-3
(0 *)
Resumes a previously suspended call, 'n' is the call identifier
(DSS1).