ZyXEL Communications omni.net Plus - Manual (Page 177)

Technical Reference for ZyXEL omni.net series
B-25
Result Code Chart Symbol Reference
V Supported
% Reporting the DTE rate as: CONNECT DTE_Speed
@ CONNECT DTE_Speed/Protocol[DCE_Speed/Error_Control[/Data_Compression]]
$ CONNECT DCE_Speed[/Error_Code]
Example: CONNECT 64000/ARQ
# CONNECT DCE_Speed/Error_Code/Protocol[/Error_Control[/Data_Compression]]
^ CONNECT DTE_Speed/Modem DCE_Speed/Data_Compression
* CONNECT DTE_Speed/Data_Compression
& CARRIER DCE_Speed
PROTOCOL: Protocol
ERROR CONTROL: Error_Control
[COMPRESSION: Data_Compression]
CONNECT DTE_Speed
Table 77. Result Code Chart Symbol Reference